Europa League app

List of catalogs of this article:

• 1, What's the problem with the yellow light of the Saiou engine light
• 2, What's wrong with the engine fault light on the new Saiou dashboard
• 3, What's wrong with the engine fault light of Chevrolet New Celio?
• 4, What's wrong with the Saio 3 engine fault light?
• 5、 The engine fault light of Sail 3 is always on, find a solution
• 6, What should I do if the Chevrolet Celio engine fault light is on?

What's the problem with the yellow light of the Saiou engine

1. The yellow light of the Saiou engine indicates that the engine is faulty, and you need to go to the 4S store or repair shop in time with a computer detector to detect the fault. Code, let's see where the fault is. Generally, a sensor is faulty. Apart from the fact that the engine of Saio has more than a dozen sensors, the most likely to fail is that the power plug of the sensor is loose.

2. The yellow light of the car engine indicates that the engine is faulty and must be tested. The red light indicates that the engine has a serious failure, and it isIn normal circumstances, it needs to be repaired immediately. If it is under special road conditions, it can be exercised in an emergency, but it is necessary to pay attention to the working status of the engine at all times.

3. The yellow light of the car engine indicates that there is a problem with the engine and must be checked. A red light indicates that there is a serious failure in the engine, and it needs to be repaired immediately under normal circumstances. If it is under special road conditions, it can be carried out in an emergency, but always pay attention to the working condition of the engine.

4. The yellow light of the engine indicates that the engine is faulty. The best choice is to go to the repair shop to check the fault code and determine the specific cause of the engine failure.

5. What is the reason why the yellow light of the car engine is on? When the car engine is not working normally and the self-diagnosis system has no fault code output, it is especially necessary to rely on the operator's inspection and judgment to determine the nature of the fault and the part of the fault.

What's wrong with the engine fault light of the new Saiou dashboard

The reason why the motive fault light is on is that the combustion state is not good. The engine combustion state is not good, which is the main reason why the engine fault light is on.

Hello, thisIt is a performance failure of the engine electronic control system, which may be a line failure or a sensor failure. It is recommended to go to the 4s store to check and repair it in time with a diagnostic instrument. For car questions, ask the car master.

It means that the engine system has failed, which will affect the normal use. If there is a problem with any sensor on the engine, the engine fault light will turn on, so the cause of the failure cannot be determined. You need to use a decoder to read the fault code to determine the location of the engine failure. Then, exclude. I hope it can be helpful to you. I forgot to adopt it.

The first one is that the car can't start, which may be caused by the failure of the fuel pump or ignition parts, so let's call for help directly.

What's wrong with the engine fault light of Chevrolet New Celio?

There are many reasons for engine failure, including sensor failure, such as water temperature sensor, crankshaft sensor, oxygen sensor, etc. There are also spark plug failure, ignition coil failure, fuel pump failure, oil line blockage and other fault lights.

The first one is that the car can't start, which may be caused by the failure of the fuel pump or ignition parts, so let's call for help directly.

There are many reasons for the failure of the car engine, including failures in sensors, such as water temperature sensors, crankshaft sensors, oxygen sensors, etc. There are also fault lights caused by spark plug failure, ignition coil failure, fuel pump failure, oil line blockage, etc.

The engine fault light is usually turned on for the following reasons: the combustion state is not good. Poor combustion of the engine is the main reason why the engine fault light is on.There are usually three situations for engine explosion: the first situation: the car is weak. The second situation: the car is weak and the engine is too noisy. The third situation: There is an obvious sound of knocking on the tank.

What's wrong with the Saio 3 engine fault light?

There are many reasons that can cause the engine fault light alarm, such as sensor failure, excessive exhaust emissions, insufficient engine combustion, etc. It is recommended that you go to the dealer, use the computer to read the engine condition, and troubleshoot in time to avoid the expansion of the problem. The way to eliminate the engine fault light is to unplug the fuse.

The intrinsic reason why the engine fault light is on: (1) Poor fuel quality. ( 2) The inside of the engine cylinder is unclean and there is deposited carbon.

Possible causes of failure: A. The failure of the start-up system makes the engine unable to rotate or rotate too slowly: 1 the battery storage is insufficient, the electrode pile clamp is loose or the electrode pile column is seriously oxidized; 2 the total circuit fuse is broken; 3 the ignition switch fails; 4 the starter fails; 5 the starter line is broken or the line connector is in poor contact.

The Saiou 3 engine fault light is always on, please find a solution

There is too much carbon inside the engine that it has changed the combustion parameters of the engine, and the fault light will not turn on until the explosion is serious. You can solve the problem after going to the repair shop to clean the engine. If the engine fault light lights up shortly after coming out of the gas station, it is probably the wrong fuel label.

Start and turn off the vehicle three times in a row. Turn off the ignition and pull out the negative pole of the engine battery, wait for 30 seconds to connect it, and then try to start. It can be eliminated after using the fault detector to troubleshoot at the 4S store.

The first one is that the car can't start, which may be caused by the failure of the fuel pump or ignition parts, so let's call for help directly.

Poor combustion state The poor combustion state of the engine is the main reason why the engine fault light is on.

It means that the SAIC General Motors Chevrolet Celio engine lacks oil. Open the hood and add a sufficient amount of transmission oil. The engine fault light is automatically eliminated. The specific steps for adding oil to the Chevrolet Celeo are as follows: open the door on this side of the cab of SAIC General Motors Chevrolet Celio.

If there is a problem with the air intake system, there will be poor combustion, and the engine fault light will turn on.

What should I do if the Chevrolet Celio engine fault light is on?

1. The first is that the car can't start, which may be caused by the failure of the fuel pump or ignition parts. Then we can call for help directly.

2. The red light indicates that the engine has a serious failure. Under normal circumstances, it needs to be repaired immediately. If it is under special road conditions, it can be exercised in an emergency, but it is necessary to pay attention to the working status of the engine at all times.

3. If the fault light is still on after the engine is started, it means that the electronic control system of the engine is faulty. It is necessary to connect the car computer diagnostic instrument to check the fault code, and then repair or replace it according to the corresponding fault code.

4. This is generally caused by the electronic control failure of the engine. It is recommended that you go to the repair shop to read the specific fault code with a decoder, and then repair it.