DigiPlus fair value

List of contents in this article:

• 1. What is the difference between distributed optical fiber and ordinary optical fiber?
• 2, What are the principle of distributed optical fiber temperature strain monitoring and the characteristics of application technology?
• 3. What does distributed optical fiber sensing system mean
• 4, Application field of distributed optical fiber sensing system

What is the difference between distributed optical fiber and ordinary optical fiber?

1. Hello, the optical fiber grating sensor uses the wavelength displacement of the optical wave caused by the deformation of the optical fiber grating to measure the stress strain temperature, etc. The optical fiber sensor uses the modulation of light waves by the external environment to cause parameter changes, such as light strength, wavelength, frequency, phase, etc. The optical fiber grating sensor should be light One of the fiber sensors.

2. Distributed optical fiber wiring is a kind of using optical fiber as a transmission medium to divide the optical fiber wiring system into multiple distributed subsystems. Each subsystem contains multiple optical fiber junction boxes and wiring racks, so as to realize communication between multiple users.

3. Principle of distributed optical fiber sensing technology. Optical fiber sensing technology realizes the measurement of environmental parameters by measuring changes in certain parameters (such as intensity, phase, frequency, polarization state, etc.) of transmitted light in optical fiber.

4. Optical fiber distributed data interface is a local area network technology developed in the mid-1980s. It provides high-speed data communication capabilities higher than that of Ethernet (10Mbps) and token networks (4 or 16Mbps) at that time.

5. The sensitivity of solid core optical fiber is extremely low, and the liquid core optical fiber is unrealistic and the received signal is related to the mode structure.

6. Distributed optical fiber temperature strain monitoring principle Distributed optical fiber temperature strain monitoring technology is based on the optical fiber sensing principle and uses optical fiber as a sensor to measure temperature and strain.

What are the principle of distributed optical fiber temperature strain monitoring and the characteristics of application technology?

The basic principle is to send the light from the light source through the incident optical fiber to the modulation area. The light interacts with the external measured parameters in the modulation area, so that the optical properties of the light (such as intensity, wavelength, frequency, phase, partial normality, etc.) change and become the modulated signal light, and then send it into the light detection through the output optical fiber. The measured parameters are obtained by the device and the demodulator.

Distributed optical fiber is a sensing system that uses optical fiber as a sensing-sensitive component and transmission signal medium.

SR-G optical fiber temperature sensor has unique technical advantages in temperature measurement in special environments such as high voltage and strong electromagnetic interference. Among them, the temperature hotspot of the fluorescent optical fiber temperature sensor used by the transmitter is not electrically connected to the receiving part of the measurement signal, which can work with high precision and high stability for a long time, which greatly improves its application scope.

Their working principle is to use the characteristics of optical fibers to transmit information. Optical fiber sensors can measure various physical quantities, such as temperature, pressure, tensile force, strain, etc. The basic structure of optical fiber sensors includes light sources, optical fibers and detectors. The light emitted by the light source is introduced into the optical fiber and then reflected into the detector.

[Abstract] BOTDR is a new type of distributed optical fiber sensing monitoring technology. Its distributed, high-precision, long-distance, real-time, remote control and other characteristics have gradually attracted wide attention from the engineering community. Since the monitoring is distributed, the data obtained has an important correlation with the geographical location.

What does the distributed of the distributed optical fiber sensing system mean

The literal meaning of distributed is to be distributed everywhere. In optical fiber temperature measurement, it means that each point of the optical fiber is a temperature measurement point. In principle, the optical fiber is different All points will produce a scattering effect. As long as the sampling is fast enough, the temperature measurement of any point of the optical fiber can be fully realized.

Distributed optical fiber is a sensing system that uses optical fiber as a sensing-sensitive component and transmission signal medium.

A distributed system is a software system built on the network. Process the assistance task, and then integrate the results. In a distributed system, a group of independent computers present a unified whole to the user, just like a system.

Application field of distributed optical fiber sensing system

1. Yes. Distributed optical fiber sensor technology is widely used in the military industry field, which can be used for real-time monitoring and control of military equipment, protection of important facilities and border security.

2. Industrial field: In the process of industrial production, distributed optical fiber temperature strain monitoring can help monitor the working status of the equipment in real time, predict the failure risk of the equipment, and take corresponding maintenance measures in time. In addition, it can also be used for feedback control and optimization of production process to improve production efficiency and quality.

3. The composition of the system, in short, is to glue the optical fiber to the measuring tube with special glue that has been verified by indoor and outdoor tests and engineering practice according to a certain construction process to form a sensing system, which we call the distributed optical fiber sensing intelligent inclined measuring tube. The sensor has all the advantages of distributed optical fiber sensors and can carry out quasi-real-time monitoring.

4. Optical fiber sensors take optical fiber as the sensing unit, which is passive, anti-interference, corrosion-resistant and long service life. It is suitable for some special occasions, such as petroleum and petrochemicals and other explosion-proof fields.

5. In the power system, it is necessary to determine temperature, current and other parameters, such as the temperature detection of high-voltage transformers and large motors, the temperature detection in the rotor, etc. Because electrical sensors are susceptible to the interference of electromagnetic fields, they cannot be used in such occasions, and only optical fiber sensors can be used.

6. In the power system, it is necessary to determine the temperature, current and other parameters, such as the detection of the temperature in the stator and rotor of high-voltage transformers and large motors. Because electrical sensors are susceptible to the interference of electromagnetic fields, they cannot be used in such occasions, and only optical fiber sensors can be used.